Commercial Door Repair & Installation in Metro Detroit

When your storefront door won't latch, your closer slams, or a panic bar sticks, your business can't just wait, and a door that won't secure is a real liability. BH Door Solutions handles commercial door repair across Metro Detroit, from aluminum glass fronts to hollow-metal service doors, so your building stays secure, code-compliant, and easy to walk through. We diagnose the actual problem and fix it right, often in a single visit.

Storefront, Aluminum & Glass Door Repair

Aluminum storefront systems and frameless herculite glass doors take a beating: constant traffic, seasonal expansion, and Michigan's freeze-thaw cycles that heave entry slabs and throw doors out of square. When a storefront door drags, won't self-close, or the pivot sags, we realign the frame, rebuild or replace pivots and pin hinges, and get the sweep sealing against the threshold again.

We also handle storefront & glass door repair for cracked, fogged, or shattered lites, with tempered safety glass and insulated units cut to spec, plus commercial entry doors in aluminum, wood, and steel. If a break-in or storm left your front damaged, we board it secure and replace the glass and hardware promptly, same-day when the schedule allows during business hours.

• Aluminum storefront & herculite glass door realignment
• Tempered and insulated glass replacement cut to spec
• Pivot, pin-hinge, and threshold repair
• Commercial entry doors in aluminum, steel, and wood

Panic Bars, Exit Devices & Commercial Hardware

Panic bars and exit devices aren't optional. Fire and building codes require them on most commercial egress doors, and when one sticks, dogs open when it shouldn't, or won't latch, you have both a security gap and a compliance problem. We repair, adjust, and replace rim, mortise, and vertical-rod panic bars & exit devices, including electrified hardware tied to access control.

We also service the hardware that makes a commercial door work every day: door closers that drift or slam, often from cold-thickened fluid in winter; mortise and cylindrical locksets; continuous and heavy-duty hinges; and weatherstripping that's let the drafts in. Dialing in the closer sweep and latch timing keeps the door protecting itself for years.

• Panic bars & exit devices: rim, mortise, vertical rod
• Electrified and access-control-integrated hardware
• Commercial door closers adjusted or replaced
• Locksets, hinges, thresholds, and weatherstripping

Hollow-Metal, Man Doors & Fire-Rated Doors

Hollow-metal doors and frames, the steel man doors on the sides and backs of nearly every commercial building, rust at the bottom, rack out of square, and bind when frames shift or hinges wear. Michigan road salt and moisture only speed that up. We repair and replace hollow-metal doors, reinforce frames, and swap corroded thresholds so your service entrance opens, closes, and locks the way it should.

Fire-rated doors carry a label for a reason, and any repair has to keep that rating intact. We service fire-rated openings, covering self-closing hardware, positive latching, correct gap tolerances, and intact labels, so your building stays code-compliant and ready to pass inspection.

• Hollow-metal (man) door and frame repair
• Rusted threshold and corroded frame replacement
• Fire-rated door service that preserves the label
• Self-closing and positive-latching adjustments

Automatic Operators & ADA Accessibility

Automatic swing and slide operators and low-energy ADA push-button operators keep your entrance accessible and welcoming, until a sensor fails, the door reverses on its own, or the operator won't hold open. We troubleshoot and repair automatic operators, replace sensors, actuators, and safety beams, and install new ADA-compliant operators so every customer, including those using wheelchairs and walkers, can get through your door without a fight.

We also verify the details that keep you compliant: opening force, hold-open time, and reversing sensors all set to accessibility requirements, so your entrance works for everyone and passes inspection.

• Automatic swing & slide operator repair
• ADA push-button (low-energy) operator installation
• Sensor, actuator, and safety-beam replacement
• Opening force and hold-open time set to ADA spec

Local Service, Built for Michigan Buildings

We're metro Detroit commercial door repair specialists, not a national call center, and we know how Michigan winters punish commercial doors, from closers that stiffen in the cold to weatherstripping that fails and thresholds that ice over. When you call, you get a straight diagnosis, honest flat-rate pricing before we start, and a free no-obligation estimate.

Our trucks roll stocked with common commercial hardware, glass, and closers, so most repairs are handled in one visit. We tackle urgent problems, including doors that won't lock or close and break-in or storm damage, promptly and same-day when the schedule allows during business hours, and every job is backed by our workmanship guarantee.

What's included

• On-site assessment and honest flat-rate quote before any work begins
• Frame realignment and squaring for binding, dragging, or sagging doors
• Panic bar and exit device repair, adjustment, or replacement
• Door closer adjustment or replacement sized to the door
• Tempered or insulated glass replacement cut to spec
• Hardware service: locksets, hinges, thresholds, and weatherstripping
• Fire-rated door service that keeps the label code-compliant
• Cleanup and a full function test before we leave